Techni-Seal and Vexcon are two of the manufacturers that supply us with cleaners and sealers for your concrete and natural stone steps, patios and walls. We have broken them down by manufacturer, depending upon the material and when the installation was done we would be able to suggest which product is best for you. Call us at 978.854.4520 with any questions.
Polymeric Jointing Sand is recommended when you have completed your walk or patio. Polymeric Jointing Sand will create a bond between the paver materials which will prevent having future problems with insects or weeds, while stabilizing the material for an extended period. Click here for polymeric sand do's and dont's.
Cleaners will remove most stains caused by grease, oil, rust and water stains. You should apply a sealer to maintain and preserve the concrete or natural stone surface. This can be done on a new or an existing stone walk or patio.
Polymeric Sand
Techni-Seal RG and HP Polymeric Sands are applied dry and will harden after wetting. They stay within joints better than any other sand, stabilize pavers, inhibit weed growth and resist insect infestation.
RG+ Polymeric Jointing Sand
Issued from the latest generation of polymers, TECHNISEAL RG+ becomes water resistant quickly after activation. Designed to make joint stabilization easier than ever, RG+ Polymeric Jointing Sand is a high-tech mix of graded sand (ASTM C-144) and binder, specially formulated for the filling of narrow or wide joints when installing† pavers, slabs or natural stones, or when replacing existing joints. It is ideal for surfaces exposed to light vehicular traffic, such as small commercial parking lots, driveways, terraces, backyards, garden paths, access roads, etc1. Easy to use, RG+ is applied dry; it starts to set a few minutes after wetting, quickly becoming resistant to erosion due to water (rain, splashes, sprinklers, etc.). Once dry and polymerized, TECHNISEAL RG+ Polymeric Sand also resists insect invasion and inhibits weed growth. Remaining flexible, it follows the movements of pavers or slabs.
MINIMUM JOINTS WIDTH: 1/8"
MAXIMUM JOINTS WIDTH: 1"
MINIMUM JOINTS DEPTH: 1.5"
(Fill paver joints completely)
Repels weeds
Prevents insect infestations
Water-resistant 90 minutes after installation
Preserves the original appearance of joints
Stabilizes the works and follows the movements
Eliminates joint erosion due to rain, pressure washing, frost and wind
Applied dry - becomes permanent after being activated with water
Available in tan, granite grey, and karbon
HP2 Polymeric Jointing Sand
TECHNISEAL HP2 POLYMERIC SAND is a state-of-the-art mix of graded sand (ASTM-144) and binder that flows smoothly down joints for a fast and effective installation of pavers with wide and false joints. It is also recommended for surfaces exposed to heavy traffic, and for high-humidity areas. (For surfaces exposed to normal conditions and for narrow joints, use TECHNISEAL RG+ POLYMERIC SAND.)
Easy to use, TECHNISEAL HP2 POLYMERIC SAND starts to set only a few minutes after being activated with water, and quickly becomes resistant to water erosion (rain, splashes, sprinklers, etc.). TECHNISEAL HP2 POLYMERIC SAND offers great resistance to weed growth, insect invasion and erosion.
MINIMUM JOINTS WIDTH: 1/8"
MAXIMUM JOINTS WIDTH: 4"
MINIMUM JOINTS DEPTH: 1.5"
Optimal strength
For high-humidity applications
Ideal for wide and false paver joints (from 1/8" to 4")
Retains original paver aesthetic
Becomes water-resistant 90 minutes after installation
Available in tan, granite grey, and karbon
Solvents
Sure Klean® 101 Lime Solvent
Sure Klean® Vana Trol®
Sure Klean® Ferrous Stain Remover
Muriacid Acid is also available. It is a excellent cleaning agent for concrete and brick. Please read the entire label before using it.
Wet & Forget®
Wet & Forget has a unique combination of biodegradable selective surfactants for Moss, Mold, Mildew & Stain removal on any exterior surface. When diluted with water and applied, it immediately goes to work on the unsightly moss, mold and mildew stains. Each time it rains, this safe, cleansing combination reactivates to help flush stains away without damaging the surface it has infested. Use on Concrete & Pavement - driveways, patios, retaining walls, sidewalks!
Learn more about polymeric sand: Visit our polymeric sand do's and dont's page for helpful hints to make your next job a success.
We have the materials, supplies and know how
to get the job done. Contact us today to discuss your latest project and ideas.
